Author Finally mapped and dyno'd...  (Read 17774 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Grasshopper   wales

    • S1000R Member  ‐    92
    • **
    • Topic Author

    Offline Grasshopper

    • S1000R Member
    • **
    • Topic Author
    • Posts: 92
    • Bike: S1000R
    • City / Town: BSE
    • Country: wales
    Finally mapped and dyno'd...
    on: March 24, 2021, 07:40:06 pm
    March 24, 2021, 07:40:06 pm
    Just back from tuners (Crowe Performance). After modding, then several days with Motorrad Germany rewriting my ECU, the bike is finally back with me.
    Bolted an Ohlins steering damper on it this afternoon, then took advantage of a wee bit of sunshine and went out for a bit of a shakedown.
    A brief ride last week indicated that the BST wheels made quite a difference to acceleration/ braking and also changes of direction. They also highlighted the limits of the steering damper, leaving the bike shaking its head any time I twisted the throttle.
    So, before I checked out the new added ponies, I bolted the Ohlins damper in place.
    Bike is now running a tad over 178bhp... This is not a happy dyno by any means. The difference is like night and day! Holy sh#t does that machine shift, now...

    If you're looking for a remap, look no further than Crowe Performance  :020:








  • Offline Airsafari87   gb

    • S1000R Master  ‐    700
    • ****
      #1

    Offline Airsafari87

    • S1000R Master
    • ****
    • Posts: 700
    • Bike: 2019 S1000R
    • City / Town: Durham
    • Country: gb
    Re: Finally mapped and dyno'd...
    Reply #1 on: March 24, 2021, 08:17:04 pm
    March 24, 2021, 08:17:04 pm
    Told you they were good didn't I?  :046:

    Audible TC on yours too?

  • Offline Grasshopper   wales

    • S1000R Member  ‐    92
    • **
    • Topic Author
    • #2

    Offline Grasshopper

    • S1000R Member
    • **
    • Topic Author
    • Posts: 92
    • Bike: S1000R
    • City / Town: BSE
    • Country: wales
    Re: Finally mapped and dyno'd...
    Reply #2 on: March 24, 2021, 08:27:57 pm
    March 24, 2021, 08:27:57 pm
    *Originally Posted by Airsafari87 [+]
    Told you they were good didn't I?  :046:

    Audible TC on yours too?

    Yes, Audible TC  :028:
    Bloody engine light has come on again, though... Phil's calling me tomorrow... :087:

  • Online SimonUK   us

    • S1000R Grand Master  ‐    3727
    • *****
      #3

    Online SimonUK

    • S1000R Grand Master
    • *****
    • Posts: 3727
    • Bike: S1000XR, S1000R
    • City / Town: Upstate SC
    • Country: us
    Re: Finally mapped and dyno'd...
    Reply #3 on: March 24, 2021, 08:53:58 pm
    March 24, 2021, 08:53:58 pm
    *Originally Posted by Grasshopper [+]
    After modding, then several days with Motorrad Germany rewriting my ECU

    What does this mean?? does he have direct contact with the Mothership????

  • Online SimonUK   us

    • S1000R Grand Master  ‐    3727
    • *****
      #4

    Online SimonUK

    • S1000R Grand Master
    • *****
    • Posts: 3727
    • Bike: S1000XR, S1000R
    • City / Town: Upstate SC
    • Country: us
    Re: Finally mapped and dyno'd...
    Reply #4 on: March 24, 2021, 08:54:26 pm
    March 24, 2021, 08:54:26 pm
    btw you graph is looking good

  • Offline Grasshopper   wales

    • S1000R Member  ‐    92
    • **
    • Topic Author
    • #5

    Offline Grasshopper

    • S1000R Member
    • **
    • Topic Author
    • Posts: 92
    • Bike: S1000R
    • City / Town: BSE
    • Country: wales
    Re: Finally mapped and dyno'd...
    Reply #5 on: March 24, 2021, 08:58:05 pm
    March 24, 2021, 08:58:05 pm
    *Originally Posted by SimonUK [+]
    What does this mean?? does he have direct contact with the Mothership????
    Yes, their engineers were plugged into my ECU, rewriting it to work with my mods.

  • Offline Airsafari87   gb

    • S1000R Master  ‐    700
    • ****
      #6

    Offline Airsafari87

    • S1000R Master
    • ****
    • Posts: 700
    • Bike: 2019 S1000R
    • City / Town: Durham
    • Country: gb
    Re: Finally mapped and dyno'd...
    Reply #6 on: March 24, 2021, 09:38:53 pm
    March 24, 2021, 09:38:53 pm
    *Originally Posted by SimonUK [+]
    What does this mean?? does he have direct contact with the Mothership????

    Yes.

    He has a tech over in Germany that he works with and is how he managed to fully crack the  ECU on our bikes.

  • Offline MA413   us

    • S1000R Master  ‐    565
    • ****
      #7

    Offline MA413

    • S1000R Master
    • ****
    • Posts: 565
    • Bike: 17íS1KR
    • City / Town: New England
    • Country: us
    Re: Finally mapped and dyno'd...
    Reply #7 on: March 24, 2021, 09:42:27 pm
    March 24, 2021, 09:42:27 pm
    Iím jealous.  Those are some nice numbers you posted up and bike looks fantastic.  :028:

  • Offline Grasshopper   wales

    • S1000R Member  ‐    92
    • **
    • Topic Author
    • #8

    Offline Grasshopper

    • S1000R Member
    • **
    • Topic Author
    • Posts: 92
    • Bike: S1000R
    • City / Town: BSE
    • Country: wales
    Re: Finally mapped and dyno'd...
    Reply #8 on: March 24, 2021, 09:44:50 pm
    March 24, 2021, 09:44:50 pm
    *Originally Posted by MA413 [+]
    Iím jealous.  Those are some nice numbers you posted up and bike looks fantastic.  :028:

    Cheers 👍

  • Online SimonUK   us

    • S1000R Grand Master  ‐    3727
    • *****
      #9

    Online SimonUK

    • S1000R Grand Master
    • *****
    • Posts: 3727
    • Bike: S1000XR, S1000R
    • City / Town: Upstate SC
    • Country: us
    Re: Finally mapped and dyno'd...
    Reply #9 on: March 24, 2021, 10:00:19 pm
    March 24, 2021, 10:00:19 pm
    *Originally Posted by Airsafari87 [+]
    Yes.
    He has a tech over in Germany that he works with and is how he managed to fully crack the  ECU on our bikes.

    very interesting!!

     



    sociology-monitor