Author Topic: Sc project exhausts  (Read 340 times)

0 Members and 1 Guest are viewing this topic.

Offline Mr diamond

  • S1000R Junior
  • *
  • Topic Author
  • Posts: 1
  • Bike: 2019 s1000r
  • City / Town: West sussex
  • Country: gb
Sc project exhausts
on: January 12, 2021, 08:43:51 PM
Looking at getting a sc project cr-t end can for my 2019 bike it will have 2 inlet pipes from the cat, if i get a full system later on will i need a new end can with 1 inlet ?

#1

Offline Toolman

  • S1000R Master
  • ****
  • Posts: 566
  • Bike: S1000R
  • City / Town: West Sussex
  • Country: gb
Re: Sc project exhausts
Reply #1 on: January 13, 2021, 04:45:55 PM

Can't help with SC but Akrapovic pipes for 2017 on have the 2 outlets as per oe.

#2

Online Airsafari87

  • S1000R Pro
  • ***
  • Posts: 435
  • Bike: 2019 S1000R
  • City / Town: Durham
  • Country: gb
Re: Sc project exhausts
Reply #2 on: January 13, 2021, 06:16:35 PM
*Originally Posted by Mr diamond [+]
Looking at getting a sc project cr-t end can for my 2019 bike it will have 2 inlet pipes from the cat, if i get a full system later on will i need a new end can with 1 inlet ?

As long as the outlets on the can match the OE headers you will be fine.

Quite a few people have fitted aftermarket headers to the OE dustbin so there is headers out there which are compatible with 2 outlet end cans.

If you're going for the stubby GP can be aware that it will be chavvy loud if you do decide to fit aftermarket headers at a later date.

I can't comment on SC project, but the similar, alternative Akrapovic stubby GP can on OE headers does sound very nice, so I'm sure thr SC Project will be similar.

#3

Offline Hooligan

  • S1000R Pro
  • ***
  • Posts: 391
  • Bike: 18 S1KR
  • City / Town: Montreal
  • Country: ca
Re: Sc project exhausts
Reply #3 on: January 13, 2021, 07:12:00 PM
*Originally Posted by Mr diamond [+]
Looking at getting a sc project cr-t end can for my 2019 bike it will have 2 inlet pipes from the cat, if i get a full system later on will i need a new end can with 1 inlet ?

An example of aftermarket headers that are compatible with dual outlet. I'm running an S.C Project S-1 can on the OEM headers with CAT. Nice tone and increase in volume on the boil.

https://www.akrapovic.com/en/moto/product/20092/BMW/S-1000-R/2019/Optional-Header-Titanium?segmentId=1&brandId=44&modelId=375&yearId=5228

 



sociology-monitor