Author Topic: Akrapovic end can clearance  (Read 469 times)

0 Members and 1 Guest are viewing this topic.

Offline Dicky-Art

  • S1000R Junior
  • *
  • Topic Author
  • Posts: 12
  • Bike: S1000R
  • City / Town: Ulverston
  • Country: gb
Akrapovic end can clearance
on: October 16, 2020, 11:51:19 AM
Hello there loving the S1000R 2016....but......
I'm a bit concerned that the factory fit Akrapovic end can is about 2mm clear of the swingarm!



Also that the Paddock Stand Bobbin might hit the underside knowing the state of our roads.



Anyone else had issues or nothing to worry about?
Cheers

#1

Offline JaseG

  • S1000R Pro
  • ***
  • Posts: 130
  • Bike: S1000R (2017)
  • City / Town: Hedon
  • Country: england
Re: Akrapovic end can clearance
Reply #1 on: October 16, 2020, 02:06:10 PM
.

Have you tried moving the exhaust to the outside of the hanger?
Last Edit: October 16, 2020, 02:08:42 PM by JaseG
Current Bikes:
BMW S1000R (2017)
Kawasaki H2SX SE+ (2020)

#2

Offline Dicky-Art

  • S1000R Junior
  • *
  • Topic Author
  • Posts: 12
  • Bike: S1000R
  • City / Town: Ulverston
  • Country: gb
Re: Akrapovic end can clearance
Reply #2 on: October 16, 2020, 10:52:17 PM
*Originally Posted by JaseG [+]

Have you tried moving the exhaust to the outside of the hanger?

Won't fit the outside of the mount. Doesn't actually touch but can imagine it rattling against it on a rough fast road.
But it is very secure and I can't shift it, even when I loosen the cat mount and can and twist and swivel it clear when it's nipped up it's back there again!

I'll keep an eye on it.

#3

Offline Dicky-Art

  • S1000R Junior
  • *
  • Topic Author
  • Posts: 12
  • Bike: S1000R
  • City / Town: Ulverston
  • Country: gb
Re: Akrapovic end can clearance
Reply #3 on: October 19, 2020, 04:00:59 PM
No issues so far!  :028: