Author Evotech Tail Tidy - M1000R  (Read 2259 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Lock   gb

    • S1000R Member  ‐    40
    • **
    • Topic Author

    Offline Lock

    • S1000R Member
    • **
    • Topic Author
    • Posts: 40
    • Country: gb
    Evotech Tail Tidy - M1000R
    on: November 26, 2023, 08:59:31 pm
    November 26, 2023, 08:59:31 pm
    Has anyone fitted an Evotech tail tidy or similar to the M1000R? The tail on the M is pretty neat as it is but was keen to see what a good tail tidy looks like on it - on evotech site it shows an S1000R on the M1000R page! Any pics would be good, cheers

  • Offline tuonodave   gb

    • S1000R Junior  ‐    6
    • *
      #1

    Offline tuonodave

    • S1000R Junior
    • *
    • Posts: 6
    • Bike: 2022 s1000r m pa
    • City / Town: london
    • Country: gb
    Re: Evotech Tail Tidy - M1000R
    Reply #1 on: December 06, 2023, 04:29:48 pm
    December 06, 2023, 04:29:48 pm
    just done my 22 plate s1000r looks real good will post pic up
    Last Edit: December 06, 2023, 04:31:28 pm by tuonodave

  • Offline Lock   gb

    • S1000R Member  ‐    40
    • **
    • Topic Author
    • #2

    Offline Lock

    • S1000R Member
    • **
    • Topic Author
    • Posts: 40
    • Country: gb
    Re: Evotech Tail Tidy - M1000R
    Reply #2 on: December 06, 2023, 09:02:12 pm
    December 06, 2023, 09:02:12 pm
    Have bought one but not fitted yet - just an impulse but sure it will look good! Will fit over Christmas with the camera and belly pan! Lots to look forward to - now being on the good weather!

  • Offline Hyper-Byker   gb

    • S1000R Pro  ‐    144
    • ***
      #3

    Offline Hyper-Byker

    • S1000R Pro
    • ***
    • Posts: 144
    • M1000R & S1000R owner. Honda MTX200R too
    • Bike: M1000R & S1000R
    • City / Town: Lowestoft
    • Country: gb
    Re: Evotech Tail Tidy - M1000R
    Reply #3 on: December 19, 2023, 10:25:03 pm
    December 19, 2023, 10:25:03 pm
    I did. It's very nice and beautifully well made. Quite a lot of work involved in fitting it. The wires have to be sandwiched between the tidy and the undertray as there is no route that will hide them, so it's not perfect, but once it's on it looks great. Not a great deal shorter than the original. It's worth every penny purely based on the quality of its parts.
    Sorry, just realised the one they do for the 2018 S1000R is the tricky one for the wires. I have both andjust looked at the pictures i posted. This is easy to fit includingthe wiring.



    Last Edit: December 19, 2023, 10:28:34 pm by Hyper-Byker

  • Offline Lock   gb

    • S1000R Member  ‐    40
    • **
    • Topic Author
    • #4

    Offline Lock

    • S1000R Member
    • **
    • Topic Author
    • Posts: 40
    • Country: gb
    Re: Evotech Tail Tidy - M1000R
    Reply #4 on: December 19, 2023, 10:45:09 pm
    December 19, 2023, 10:45:09 pm
    Looks good and thanks for sharing. As you say the original does look good and the evotech isn't that much shorter but still noticable.Does look a faff to fit, but I'm looking to put some cameras on, so whilst everything is off can have a look

  • Offline Lock   gb

    • S1000R Member  ‐    40
    • **
    • Topic Author
    • #5

    Offline Lock

    • S1000R Member
    • **
    • Topic Author
    • Posts: 40
    • Country: gb
    Re: Evotech Tail Tidy - M1000R
    Reply #5 on: December 31, 2023, 11:21:32 pm
    December 31, 2023, 11:21:32 pm
    Eventually fitted mine - got to take quite a bit of to get to everything but good instructions. Going to start with the small plate, but if I get hassles will swap back to standard