Author S1000rr fairing holes  (Read 3757 times)

0 Members and 1 Guest are viewing this topic.

  • Offline Georamage   scotland

    • S1000R Pro  ‐    124
    • ***
    • Topic Author

    Offline Georamage

    • S1000R Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: S1000r
    • Country: scotland
    S1000rr fairing holes
    on: July 09, 2023, 08:57:14 pm
    July 09, 2023, 08:57:14 pm

    Anyone found or made something up to cover holes in frame where rr fairing bolted on on 3rd gen s1r.
                   Thanks George r

  • Offline Lock   gb

    • S1000R Member  ‐    40
    • **
      #1

    Offline Lock

    • S1000R Member
    • **
    • Posts: 40
    • Country: gb
    Re: S1000rr fairing holes
    Reply #1 on: July 09, 2023, 11:20:42 pm
    July 09, 2023, 11:20:42 pm
    Always wondered what these markings were - thought it was something manufacturing but is just a fairing mounting for the RR. Would have thought they would have sprayed over at factory. Surprised R&G haven't made a £30 cover for these!

  • Offline Steely   gb

    • S1000R Member  ‐    22
    • **
      #2

    Offline Steely

    • S1000R Member
    • **
    • Posts: 22
    • Bike: S1000R Sport
    • City / Town: NorwichS
    • Country: gb
    Re: S1000rr fairing holes
    Reply #2 on: August 11, 2023, 12:30:26 pm
    August 11, 2023, 12:30:26 pm
    I filled them with a couple of black coated aluminium dome-head screws that I had laying around left over from another bike.

  • Offline Hyper-Byker   gb

    • S1000R Pro  ‐    144
    • ***
      #3

    Offline Hyper-Byker

    • S1000R Pro
    • ***
    • Posts: 144
    • M1000R & S1000R owner. Honda MTX200R too
    • Bike: M1000R & S1000R
    • City / Town: Lowestoft
    • Country: gb
    Re: S1000rr fairing holes
    Reply #3 on: August 21, 2023, 07:53:14 pm
    August 21, 2023, 07:53:14 pm
    I've been looking all over the internet for blankig plates for this very location. Nothing.

  • Offline Georamage   scotland

    • S1000R Pro  ‐    124
    • ***
    • Topic Author
    • #4

    Offline Georamage

    • S1000R Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: S1000r
    • Country: scotland
    Re: S1000rr fairing holes
    Reply #4 on: August 22, 2023, 10:49:38 am
    August 22, 2023, 10:49:38 am


    Similar to steely going to go down the screw route and not paint.Options now are the couple of plastic spacers found in toolbox,just the screw itself or which Iím erring for getting a small black washer with the screw a small job which is doing my nut in what to do 😂
    Last Edit: August 22, 2023, 10:50:48 am by Georamage

  • Offline Georamage   scotland

    • S1000R Pro  ‐    124
    • ***
    • Topic Author
    • #5

    Offline Georamage

    • S1000R Pro
    • ***
    • Topic Author
    • Posts: 124
    • Bike: S1000r
    • Country: scotland
    Re: S1000rr fairing holes
    Reply #5 on: August 22, 2023, 01:48:33 pm
    August 22, 2023, 01:48:33 pm

    Final version for me lifeís too short at least it will keep holes from clogging up.
                       George r
                     
    Last Edit: August 22, 2023, 01:50:00 pm by Georamage