quickshifter an cc not working, even with new switch.

[XenoSteven]

I have a 2016 s1000r. I replaced the the microswitch as I thought that it was the culprit, but I still have neither function properly. Any tips would be appreciated.

[Hooligan]

Hook it up to diagnostic (Gs-911, Motoscan) to check for faults. May help to narrow the issue down. Check all connectors associated with QS and new switch.

[starpower]

It can also be an issue with the tab on the lever not making proper contact.

[XenoSteven]

Originally Posted by Hooligan

Hook it up to diagnostic (Gs-911, Motoscan) to check for faults. May help to narrow the issue down. Check all connectors associated with QS and new switch.

I'd need to get one, any specific model you recommend ? Thanks.

[XenoSteven]

Originally Posted by starpower

It can also be an issue with the tab on the lever not making proper contact.

That's the first thing I checked, I even tried rotating the little piece of metal bellow the switch so it was always pressed, but still the same.

[Hooligan]

Originally Posted by XenoSteven

I'd need to get one, any specific model you recommend ? Thanks.

The GS-911 is arguably the best but has the price tag to boot. Not certain if the Motoscan Ultimate app has the same capabilities. I was using you the app with the OBD to reset service minder, cycle the ABS pump during fluid flushes etc.
For the price of the GS-911, it would probably be cheaper to visit a dealer for a one off, pay an hour or so labor and have them run the the diagnostics.     

[Hamburg]

Incorrect chain tensioner can cause problems

[S1000R_USA]

Loosen and move around the
 Metal plate that hides the sensors for cc and clutch position.  If i recall the utube video I watched on this its adjustable